# AD - 1/4" Pressure Nozzles w/ Carabiner (Set of 5 Jets)

Automize Detailing 1/4" Pressure Nozzles, Set of 5 | Automize 

# Five Jets. Only Two Belong On Paint.

A complete set of five 1/4" quick connect nozzles — 0°, 15°, 25°, 40° and a chemical jet — on a carabiner so the one you need is always on hand.

Most people run whatever tip came pre-fitted on the lance and never think about it again, which is why pre-washes take twice as long as they should. The spray angle decides everything: how hard the water lands, how much ground it covers, and whether it's safe on the surface in front of you. A wide fan spreads the force out and rinses gently, while a narrow one concentrates the same pressure into a fraction of the area. For bodywork you want the 25° and the 40° — enough force to shift road film, spread wide enough not to concentrate it in one spot. The 15° and 0° are not for paint. They belong on concrete, drains, mud-packed arch liners and seized fasteners, where you want impact and don't care about the finish. The chemical jet is the low-pressure one: it opens the injector circuit so snow foam and detergent draw properly instead of blasting straight through. All five share the universal 1/4" quick connect, and the carabiner means they stay clipped to the machine, the trolley or your belt instead of scattered across the floor.

25° and 40° For Cars These two cover everything on a vehicle — pre-rinse, wheels, final rinse. The wide fan keeps the force spread out and off your clear coat.

0° and 15° For Hard Surfaces Too aggressive for bodywork. Right for driveways, gutters, arch liners, undertrays and anything caked solid.

Chemical Jet Included The low-pressure tip that lets your detergent injector actually pull product — essential if your machine foams through the lance.

Carabiner Clip Keeps all five together and off the ground. Swap a tip in seconds mid-wash without hunting for the one you dropped.

## What's in the Set

|     |     |
| --- | --- |
| 0° Jet | Pinpoint stream. Maximum impact, minimum coverage. Hard surfaces only — never paint or trim |
| 15° Jet | Narrow fan for stubborn ground-in dirt, concrete and arch liners. Too aggressive for bodywork |
| 25° Jet | General-purpose detailing angle. Pre-rinse, wheels, arches, lower panels |
| 40° Jet | Wide, gentle fan. Final rinses, large panels, glass and anything delicate |
| Chemical Jet | Low-pressure tip for drawing detergent and snow foam through the injector |
| Connection | 1/4" quick connect (male) — fits any standard lance or coupler |
| Included | 5 jets on a carabiner clip |

Angle recommendations are reference points — actual force at the surface depends on your machine's pressure and flow, and on how close you hold the lance. Keep the 0° and 15° jets away from paint, trim, decals, glass and soft plastics entirely, maintain distance on any surface, and test an inconspicuous area first. Confirm your machine's output falls within the nozzles' working range before use.

Right tip, right surface. That's the whole trick.  
**Order now** for **quick delivery all over Pakistan**.

## Details

- **Price:** 1995.0 PKR
- **Tags:** Accessories

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 1995.00 PKR | Out of stock |

---

> Source: [Automize](https://automize.pk/products/ad-1-4-pressure-nozzles-w-carabiner-set-of-5-jets)
> Updated: 2026-11-14
