# Carpro Hydro2 Foam - 1 Step Wash and Coat (500ml)

CarPro HydrO2 Foam | Automize 

# Wash and Seal In One Pass.

CarPro HydrO2 Foam is a pH-neutral foam wash that cleans your car and lays down a silica-based hydrophobic sealant in a single step — no separate sealant application, no cure time, no extra weekend hours.

Most wash-and-seal hybrids are gimmicks. HydrO2 Foam is the real version: a genuine foam wash built around the same hydrophilic glass fibers and silicon polymers that power CarPro's HydrO2 silica sealant. The foam cleans on contact, and as you rinse, those polymers bond to the surface and leave a glossy, beading layer that lasts months — not one drive.

True 2-in-1 Cleans and seals in the same wash. Not a "wash with a little shine" — an actual silica-based sealant that bonds as you rinse and leaves months of hydrophobic protection behind.

Coating-Safe & pH-Neutral Safe on ceramic-coated cars as a maintenance wash — it actually enhances the coating's beading rather than stripping it. Also safe on waxes, sealants, paint, glass, wheels, and plastics.

No Cure Time Unlike traditional sealants that need hours of cure time indoors, HydrO2 Foam locks in during the rinse. Wash, rinse, dry, drive.

Months of Protection Per Wash CarPro rates the silica shell to resist UV, acids, alkaline cleaners, and general contamination for 3+ months with normal use — added to every time you wash.

## 🛠️ How to Use

1

**Prep the Car** Work in the shade on a cool surface — never in direct sun or on hot panels. Pre-rinse to remove loose dirt. If the car is heavily soiled, wash first with CarPro Reset before using HydrO2 Foam.

2

**Foam & Wash** In a foam cannon, dilute roughly 1:9 with water. Foam one panel at a time and wash gently with a wool or plush microfiber mitt. Do not let the foam dry on the surface — this is the single most important rule.

3

**Rinse & Dry** Rinse the panel thoroughly before moving on. Once the full car is washed, rinse end to end and dry with a plush microfiber drying towel or forced-air blower. No curing, no buffing — the sealant is already working.

## Quick Reference

Product Type

pH-Neutral Wash + Silica Sealant (2-in-1)

Typical Dilution

Around 1:9 with water in a foam cannon

Protection Duration

Up to 3+ months per CarPro (conditions-dependent)

Works On

Paint, glass, plastic, wheels, coated and uncoated surfaces

Use Conditions

Cool panels only, out of direct sunlight, panel-by-panel

HydrO2 Foam must not be allowed to dry on the surface — doing so can cause visible high spots or rainbowing that are difficult to remove. Always work panel by panel in the shade, rinse thoroughly, and refer to the manufacturer's current label for the most up-to-date guidance.

The fastest way to a sealed, beading car.  
**Order now** for **quick delivery all over Pakistan**.

## Details

- **Price:** 5000.0 PKR
- **Tags:** Car Shampoo, Carpro, Liquid Sealant, Sealant

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 5000.00 PKR | In stock |

---

> Source: [Automize](https://automize.pk/products/carpro-hydro2-foam-1-step-wash-and-coat-500ml)
> Updated: 2026-07-10