# Deli Air Blow Gun 110MM DL-XQ01

# The Drips That Ruin a Dry. Blow Them Out First.

A trigger-operated air blow gun with a 110mm angled nozzle, for clearing trapped water and dust out of the places a towel can't reach.

You dry the car properly, then reverse off the drive. Water runs out of everything. Mirror housings, badge edges, grille slats, lug nut recesses, boot shuts, the gap behind a spoiler — every one holds water that releases ten minutes later and dries into mineral spotting across a panel you'd already finished. A blow gun ends that cycle. Compressed air clears those cavities in seconds, with no towel touching paint, which matters even more on a coated or freshly waxed car where contact is the main marring risk. The 110mm nozzle gives you reach into recesses without putting your hand or the gun body against the bodywork, and the same tool blows dust out of interior vents, seat rails and switchgear before you start on the cabin.

No Contact, No Marring Clears water and dust without anything touching the paint — the safest way to finish a dry on coated or freshly protected panels.

Reaches Into Recesses The 110mm angled nozzle gets into badges, grilles, mirror housings, wheel recesses and panel shuts where towels can't go.

Stops Post-Wash Spotting Trapped water is what runs out later and dries into mineral marks. Clearing it is the difference between a dry and a finished dry.

Interior Use Too Blows dust out of air vents, seat rails, switchgear and console seams before you wipe anything down.

## 🛠️ How to Use

1

**Connect and Check** Fit to your compressor line and confirm the thread matches before pressurising. Wear eye protection — debris comes back at you, not away from you.

2

**Work Top-Down** After rinsing, blow water out of mirrors, badges, grilles, panel shuts and wheel recesses before you start drying with a towel.

3

**Feather the Trigger** Use partial trigger for interior work and delicate areas. Keep the nozzle a sensible distance from paint and never point it at anyone.

## Reference Points

Model

Deli DL-XQ01

Nozzle Length

110mm, angled

Operation

Trigger operated, variable airflow by trigger position

Air Inlet Thread

1/4" NPT

Requires

An air compressor — this is an attachment, not a standalone blower

Detailing Uses

Post-wash water removal, badge and grille drying, wheel recesses, interior vents and seams

Always wear eye protection when using compressed air, never direct the nozzle at people or animals, and keep within the maximum working pressure of your compressor and hose. Use an inline water trap or filter if your compressor doesn't have one — oil or moisture carried through the line will land on the paint you just finished.

The cheap tool that quietly saves every dry you do.  
**Order now** for **quick delivery all over Pakistan**.

## Details

- **Price:** 1500.0 PKR

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 1500.00 PKR | In stock |

---

> Source: [Automize](https://automize.pk/products/deli-air-blow-gun-110mm)
> Updated: 2026-10-14