# Gyeon Q2M Foam (1l)

Gyeon Q²M Foam Pre-Wash Snow Foam | Automize 

# The Best Pre-Wash Step. At a Price That Makes Sense.

Gyeon Q²M Foam is a highly concentrated snow foam pre-wash that builds a thick, clinging foam to dissolve and lift road grime before your wash mitt ever touches the paint — coating-safe, highly effective, and economical enough to use on every single wash.

The whole point of a pre-wash is to reduce the amount of grit the mitt has to drag across your paint. The less contamination on the surface before contact, the fewer swirl marks introduced over time. Q²M Foam does this better than most snow foams on the market — thick, long-lasting foam that clings to surfaces and dissolves grime rather than running straight off. At 50ml per car and a dilution of up to 1:15, a single litre covers around 20 cars. That's Gyeon pre-wash quality at a cost per wash that removes every excuse not to foam before every single contact wash.

Thick, Clinging Foam Q²M Foam builds a dense, long-lasting foam layer that sticks to vertical surfaces and dirty areas rather than running off — giving the active cleaning agents time to penetrate and dissolve grime before the rinse.

Coating Safe Specifically formulated to be safe on ceramic coatings, sealants, and waxes. Most active snow foams are either strongly alkaline or leave a residue that degrades protective layers — Q²M Foam does neither.

Highly Concentrated — Great Value At around 50ml per car and a dilution range of 1:5 to 1:15, a single 1L bottle covers up to 20 cars. A 4L bottle covers the whole season. Gyeon quality at a cost per wash that makes the pre-wash stage a no-brainer.

Safe on All Exterior Surfaces Safe on coated and uncoated paint, polished alloy rims, plastic trim, and exterior surfaces throughout the car. No surface exclusions, no masking required — foam the whole car and rinse.

## 🛠️ How to Use

1

**Dilute** Add Q²M Foam to your foam cannon or sprayer — dilute 1:15 for lightly soiled cars, 1:5 for heavily contaminated or uncoated vehicles. Work on a cool car out of direct sunlight.

2

**Apply Bottom to Top** Apply foam evenly across the car starting from the bottom and working upwards. Allow to dwell for up to a minute — the foam will begin dissolving and lifting contamination from the surface.

3

**Rinse & Wash** Rinse thoroughly with a pressure washer before the foam dries. Follow immediately with a contact wash using Gyeon Q²M Bathe or a pH-neutral shampoo — significantly less contamination to deal with, significantly safer for the paint.

## Quick Reference

Product Type

Highly concentrated snow foam pre-wash

Dilution Range

1:5 (heavy soiling) to 1:15 (light soiling)

Consumption

Around 50ml per car — approx. 20 washes per 1L bottle

Coating Safety

Safe on ceramic coatings, sealants, and waxes

Surfaces

All exterior surfaces — paint, alloy, trim, plastics

Available Sizes

1L / 4L

Always dilute before use — never apply neat. Do not allow foam to dry on the surface — rinse before it starts to break down. Never apply in direct sunlight or on a hot car. Dilution ratio should be adjusted based on the level of contamination and whether the vehicle is coated or uncoated. Refer to Gyeon's current product label for the most up-to-date guidance.

Gyeon pre-wash quality. Every wash. Every time.  
**Order now** for **quick delivery all over Pakistan**.

## Details

- **Price:** 3950.0 PKR

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 3950.00 PKR | In stock |

---

> Source: [Automize](https://automize.pk/products/gyeon-q-m-foam-1ltr)
> Updated: 2026-07-13