# Kovax Abrasive Paper Flexible Back (Silicon Carbite) SFAC

Kovax Abrasive Paper Flexible Back SFAC | Automize 

# Japanese Abrasives. No Bucket Required.

Kovax SFAC flexible-back silicon carbide sheets in 230 × 280 mm — the wet sanding paper refinish shops use when the scratch pattern has to be predictable.

Anyone who has sanded with cheap paper knows the two ways it fails. Either the grit tears off and you're suddenly cutting with bare backing, or the backing itself goes soft and tears mid-pass and takes a chunk of your schedule with it. Kovax solved both decades ago with resin-over-resin bonding on a latex-impregnated flexible backing, and the result is paper that cuts at the same rate from the first pass to the last. That consistency is the whole point. A sheet that dulls unevenly leaves a scratch pattern you cannot predict, which means you cannot plan your compound and polish stages around it. The flexible backing conforms to curves and body lines without creasing, and because it's engineered for wet use there's no pre-soaking ritual before you start — wet the panel and go. There's also an anti-slip treatment on the reverse, specifically so the sheet doesn't creep under your hand or under a block, which is exactly what you want when you're working to a line.

No Pre-Soaking The flexible latex-impregnated backing is ready to use straight from the sheet. No bucket, no waiting, no soggy paper.

Anti-Slip Backing Treated on the reverse so the sheet stays put in your hand or on a block instead of creeping mid-pass.

Consistent Cut Rate Resin-over-resin bonded silicon carbide holds its cutting edge from start to finish, so the scratch pattern stays predictable.

Refinish Standard Made in Japan by Kovax and used in auto repair and assembly environments where a flexible back and high finish are both required.

## 🛠️ How to Use

1

**Block It** Wrap the sheet around a sanding block. Hand pressure alone follows the dips in a panel; a block cuts a flat plane, which is the entire reason you're sanding.

2

**Keep It Wet** Flood the panel and rinse the sheet regularly. Water carries the removed material away and stops the grit loading up, which is what causes tramlines.

3

**Step Up Gradually** Work through the grits in sequence without skipping more than one step at a time, wiping and inspecting between each. Dry the panel to check your progress — wet paint hides everything.

## Grit Guide

|     |     |
| --- | --- |
| P240 | Heavy levelling. Filler shaping, runs, heavy orange peel, paint removal |
| P400 | Primer levelling and refining P240 scratches before sealer |
| P600 | Primer finishing and surface preparation before topcoat |
| P800 | Final primer refinement and light defect levelling in clear |
| P1000 | Clear coat levelling — nibs, dust inclusions, orange peel |
| P1200 | Refining P1000 scratches ahead of compounding |
| P1500 | Pre-compound refinement. Shallow enough for a heavy cut to clear |
| P2000 | Finest stage — minimal scratch depth before compound and polish |
| Sheet Size | 230 × 280 mm (9" × 11") |
| Abrasive | Silicon carbide, resin-over-resin bonded |
| Backing | Flexible latex-impregnated paper, anti-slip reverse |
| Use | Wet sanding |

Grit recommendations are reference points — the right starting grit depends on the defect depth, the paint system and how much material you can afford to remove. Always measure film thickness before sanding clear coat; a gauge reading is the only thing standing between a corrected panel and a respray. Sand only as coarse as the defect genuinely requires, follow with the appropriate compound and polish stages, and wear eye and respiratory protection. Sold as single sheets — select your grit at checkout.

Good paper doesn't make you faster. It makes you predictable.  
**Order now** for **quick delivery all over Pakistan**.

## Details

- **Price:** 495.0 PKR
- **Tags:** Kovax, Sanding Sheet

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| P240 | 495.00 PKR | In stock |
| P400 | 495.00 PKR | In stock |
| P600 | 495.00 PKR | In stock |
| P800 | 495.00 PKR | In stock |
| P1000 | 495.00 PKR | In stock |
| P1200 | 495.00 PKR | In stock |
| P1500 | 495.00 PKR | In stock |
| P2000 | 495.00 PKR | In stock |

---

> Source: [Automize](https://automize.pk/products/kovax-abrasive-paper-flexible-back-silicon-carbite-sfac)
> Updated: 2026-11-17
