# Meguiar's Water Spot Remover & Multi-Surface Polish (473ml)

Meguiar's Water Spot Remover & Multi-Surface Polish | Automize 

# Spots a Wash Won't Touch. Polish Them Out.

Meguiar's Water Spot Remover is a multi-surface polish that removes dried mineral deposits and light etching from paint, glass, chrome, hard plastic and metal.

A water spot isn't sitting on the paint. It's bitten into it. Once a droplet has air-dried, you're left with dried mineral deposits and sub-surface etching, and no shampoo, decon spray or quick detailer will shift that — it needs abrading away. This is the product for the job: the defect correction of a compound with the gloss enhancement of a polish, so you clear the spotting and leave the panel with better clarity than you started with rather than a dull corrected patch. The multi-surface formula is what makes it practical, because sprinkler overspray never lands on paint alone. The same bottle handles the windscreen, the chrome surround, the black plastic trim and the wheels, so you're not switching products for every material on the same panel. Works by hand for a few spots, or on a DA when the whole car's been sat under a sprinkler.

Compound Cut, Polish Finish Abrades away the deposits and light etching, then leaves enhanced clarity and gloss rather than a dulled correction patch.

One Bottle, Every Surface Paint, glass, chrome, hard plastic and metals — sprinkler damage crosses materials, and so does this.

Clear Coat Safe Formulated to remove spotting without harming the clear coat underneath, on all glossy painted surfaces.

Hand or Machine A foam applicator or microfibre for isolated spots, a dual action polisher when a whole panel needs it.

## 🛠️ How to Use

1

**Wash First** Wash and dry the vehicle, working in the shade on cool panels. Loose grit under an applicator turns a repair into a correction job.

2

**Apply and Work** Apply to the surface or onto a foam applicator, microfibre or cotton terry towel, then polish one section at a time with firm, even pressure.

3

**Wipe and Inspect** Buff off with a clean microfibre and check the section under strong light. Repeat on stubborn spotting rather than forcing one heavy pass.

## Reference Points

Type

Multi-surface water spot remover and polish

Removes

Dried mineral deposits, water spotting and light sub-surface etching

Surfaces

Paint, glass, chrome, hard plastic and all metal surfaces

Not For

Flat, matte or satin finishes

Application

By hand with a foam applicator or towel, or by dual action polisher

Contents

473ml (16 fl oz)

After Correction

Re-protect the panel — polishing removes any wax or sealant that was there

Meguiar's advise this product is for clear coat and glossy painted surfaces only, and not for use on flat, matte or satin finishes. This is an abrasive polish, so it removes a small amount of material: test on an inconspicuous area first, avoid edges and body lines, and expect severe or long-standing etching to need more than one pass or a stronger correction stage. Work in the shade on cool panels and refer to the manufacturer's label for current guidance.

The fix for the damage a wash leaves behind.  
**Order now** for **quick delivery all over Pakistan**.

## Details

- **Price:** 6300.0 PKR

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 6300.00 PKR | In stock |

---

> Source: [Automize](https://automize.pk/products/meguiars-water-spot-remover-multi-surface-polish-473ml)
> Updated: 2026-10-17