# Basic Undercarriage Washer Attachment (1/4")

Basic Undercarriage Washer Attachment | Automize 

# You've Never Washed Half The Car.

A wheeled undercarriage attachment with a 1/4" quick connect — rolls beneath the vehicle and fires upward, so the chassis finally gets the same attention as the paint.

Everything that destroys a car long-term lives underneath it. Mud packs into chassis rails and sits there holding moisture against bare metal. Road grime cakes onto suspension arms and subframe seams. Dust and grit build up in the crevices around the exhaust and heat shields where nothing ever dries properly. That's where rust actually starts. The problem has always been access — you cannot see the underside, you cannot reach it with a lance, and getting a car on ramps for a wash is nobody's idea of a routine. This solves it by going flat. The attachment sits on castors low enough to roll under the sills, carries a set of upward-facing jets, and you simply push it from one end of the car to the other while the pressure washer does the rest. No ramps, no jack, no lying on the ground. Two passes and the underside is cleaner than most cars have been since they left the factory.

Reaches What You Can't Chassis rails, subframe seams, suspension arms, wheel wells and heat shield crevices — the areas a lance never touches.

No Ramps, No Jack Rolls under the car on castors and works flat. Undercarriage washing becomes part of the routine instead of an event.

Upward-Facing Jet Array Multiple nozzles fire straight up across the width of the bar, so a single pass covers a wide strip of the floor pan.

Standard 1/4" Quick Connect Clips onto any lance or hose already running a standard coupler. No adapters, no tools, no machine-specific fitting.

## 🛠️ How to Use

1

**Clear the Ground First** Work on a flat, open surface and sweep away loose stones. Park with the handbrake on and the car in gear. Anything on the ground will be fired upward.

2

**Connect and Position** Clip the attachment to your lance or hose, set it on the ground at one end of the car, and check the hose has enough slack to run the full length before you start.

3

**Push Slowly, Then Repeat** Start the machine and push the bar steadily from front to rear, then back again on a slightly different line. Slow and overlapping beats fast and once.

## Details

|     |     |
| --- | --- |
| Type | Wheeled undercarriage washer attachment with upward-facing jet array |
| Connection | 1/4" quick connect — fits any standard lance or coupler |
| Spray Direction | Vertical, upward across the width of the bar |
| Mobility | Castor wheels — rolls under the vehicle on a flat surface |
| Best For | Chassis, floor pan, subframe, suspension components, wheel wells, exhaust and heat shield areas |

Confirm your machine's pressure and flow fall within the attachment's working range before use. Water is being directed upward at pressure, so wear eye protection and keep bystanders, pets and children well clear. Keep the jets away from exhaust sensors, exposed wiring looms, connectors and undertray fixings, and never use it on a hot exhaust or immediately after driving. Electric vehicles, modified undertrays and aftermarket exhaust systems warrant extra caution — check what sits in the spray path first. Requires a flat, level surface with enough clearance beneath the vehicle.

Paint is what people see. The chassis is what the car dies of.  
**Order now** for **quick delivery all over Pakistan**.

## Details

- **Price:** 11500.0 PKR

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 11500.00 PKR | In stock |

---

> Source: [Automize](https://automize.pk/products/pressure-washer-underbody-attachment)
> Updated: 2026-11-16
