Meguiar's Professional M888 Beyond Ceramic Paint Coating [M888]

Made in America, Now Available at Automize Pakistan!

The Meguiar’s Professional M888 Beyond Ceramic Paint Coating is a high-performance, multi-year ceramic coating formulated in the USA, designed to provide long-lasting protection, outstanding slickness, and deep gloss for painted surfaces. It’s engineered to deliver professional-level durability and chemical resistance, while being surprisingly user-friendly for enthusiasts. 

• Extreme Durability & Chemical Resistance: Offers multi-year protection when properly prepped and maintained. 
• 100% Active Ingredients: Unlike many coatings, M888 uses a full-active formula (no “flash-off” carriers), boosting performance and longevity. 
• Superior Water Beading & Slickness: Highly hydrophobic, making washing, drying, and maintenance much easier. 
• Gloss Enhancement: Helps fill in minor paint defects and improves depth and clarity of the finish. 
• Forgiving Application: Self-leveling formula is more user-friendly; single-coat application is possible without requiring a certified installer. 
• Safe on Multiple Surfaces: While optimized for glossy paint, it can also be used on plastic trim, decals, PPF (Paint Protection Film), and wheels. 
• Complete Kit Included: Comes with a tri-layer microfiber applicator and a professional application guide (with QR code to access SOPs, videos, and SDS). 
• Not for Matte/Satin Finishes: May increase unwanted gloss, so it’s not recommended for non-gloss paints. 

🛠️ How to Use

1. Prep the Surface: Wash the car thoroughly using a pH-balanced shampoo and two-bucket method. 
2. Decontaminate: Use a clay bar or iron remover to remove embedded contaminants. 
3. Correct the Paint: If there are scratch or swirl marks, do paint correction — ensures optimal bonding and finish. 
4. Final Wipe-Down: Use a prep spray (IPA or surface prep) to remove polishing oils and any residue. 
5. Apply the Coating: Shake the bottle, then apply a few drops onto the tri-layer microfiber applicator. Spread the coating in small, manageable panels. 
6. Allow Dwelling Time: Let it sit on the paint for about 2–5 minutes (depending on temperature and humidity) before wiping off. 
7. Wipe Off: Use a clean microfiber cloth to remove the excess coating. High spots can be corrected by reapplying a little product and wiping. 
8. Initial Cure: Let the coating cure for ~24 hours before exposing to water. 
9. Full Cure: It takes about a week to reach maximum hardness — avoid aggressive washing or harsh chemicals in this period.

By applying Meguiar’s M888 Beyond Ceramic Paint Coating correctly, you’ll gain a long-lasting, high-gloss, extremely slick finish that protects your car’s paint in Pakistan’s challenging conditions — from heat and dust to chemical contaminants.