Meguiar's Mirror Glaze Professional Foam-Cut Compound (3.79l)

Made in America, Now Available at Automize Pakistan!

Meguiar’s Mirror Glaze Professional Foam-Cut Compound (3.79L) is a professional, heavy-cut polishing compound formulated to remove sanding marks, severe swirls, and surface defects quickly while leaving a high-gloss finish when used with foam pads. Optimized for both rotary and dual-action polishers, it’s a go-to product for body shops and professional detailers who need fast defect removal with an excellent final appearance.

• ✅ Ultra-fast defect removal: Removes 1200-grit and finer sanding marks and severe swirls for rapid correction.
• ✅ Foam-pad optimized: Specifically formulated to perform exceptionally with foam cutting and polishing pads.
• ✅ High-gloss final finish: Delivers a deep, reflective appearance that reduces the need for heavy finishing steps.
• ✅ Low dust / easy wipe-off: Works cleanly with minimal sling and effortless residue removal.
• ✅ Body-shop safe & paint-friendly: Designed to be safe on modern clear coats while providing professional-grade cutting power.

🛠️ How to Use

1. Preparation: Wash and decontaminate the panel (iron fallout/tar/clay) and ensure the surface is dry and free from loose contamination.
2. Pad & Machine: Use a quality foam cutting pad. You can apply with a dual-action polisher or a rotary machine depending on preference and defect severity.
3. Product Application: Apply a few pea-sized drops of compound onto the pad (or a ribbon across the pad for large panels).
4. Work in Sections: Work a 40×40 cm (approx.) area at moderate speed (DA) or appropriate RPM for your rotary—begin with light pressure to spread product, then increase pressure/speed as needed to improve cut.
5. Check Progress: Wipe the panel with a clean microfiber towel and inspect under good lighting. Repeat if deeper defects remain.
6. Refine the Finish: For the ultimate gloss, follow with a finishing polish (e.g., Meguiar’s finishing) and a soft finishing pad.
7. Clean & Protect: Remove polish residues with an isopropyl wipe or panel prep (QD) and apply paint protection (sealant, wax, or ceramic coating) to lock in the finish.

Ideal for professional detailers and car owners in Pakistan, Meguiar’s Mirror Glaze Foam-Cut Compound (3.79L) combines fast cutting power with a refined finish.