Liqui Moly Brake Fluid DOT 4 [3091] (250ml)

Liqui Moly DOT 4 Brake Fluid is a fully synthetic glycol‑ether hydraulic fluid designed for modern disc, drum, ABS brake, and clutch systems. It provides exceptionally high dry and wet boiling points to ensure safe braking even after moisture absorption. Special corrosion inhibitors and moisture absorbers protect your hydraulic system from oxidation, steam bubble formation, and component wear.

• ✅ Dry boiling point > 260 °C; wet boiling point > 155 °C for reliable braking under.
• ✅ Exceptional resistance to oxidation and thermal degradation.
• ✅ Excellent elastomer compatibility; safe for seals and hoses.
• ✅ Fully miscible with other quality synthetic brake fluids
• ✅ Meets FMVSS 116 DOT 3 & DOT 4, ISO 4925 Class 3/4, SAE J1703 / J1704 standards

🛠️ How to Use

1. Verify that your vehicle requires DOT 4 or DOT 3 brake fluid (refer to owner’s manual).
2. Use proper bleeding tools to completely drain the old brake or clutch fluid.
3. Refill with Liqui Moly DOT 4 Brake Fluid, then bleed the system until clear fluid flows.
4. Maintain fluid level regularly; recommended change at least every 12 months or per manufacturer’s advice.
5. Avoid mixing with mineral oil fluids and prevent contact with painted surfaces; rinse immediately if spilled.

Designed to meet the demanding braking conditions of modern vehicles in Pakistan. This premium DOT 4 fluid ensures consistent brake feel, corrosion protection, and reliable performance through moisture and temperature extremes.