Carpro Hydro2 Foam - 1 Step Wash and Coat (500ml)
Carpro Hydro2 Foam - 1 Step Wash and Coat (500ml)

Carpro Hydro2 Foam - 1 Step Wash and Coat (500ml)

Rs.5,000.00
CarPro HydrO2 Foam | Automize

Wash and Seal In One Pass.

CarPro HydrO2 Foam is a pH-neutral foam wash that cleans your car and lays down a silica-based hydrophobic sealant in a single step — no separate sealant application, no cure time, no extra weekend hours.

Most wash-and-seal hybrids are gimmicks. HydrO2 Foam is the real version: a genuine foam wash built around the same hydrophilic glass fibers and silicon polymers that power CarPro's HydrO2 silica sealant. The foam cleans on contact, and as you rinse, those polymers bond to the surface and leave a glossy, beading layer that lasts months — not one drive.

True 2-in-1 Cleans and seals in the same wash. Not a "wash with a little shine" — an actual silica-based sealant that bonds as you rinse and leaves months of hydrophobic protection behind.
Coating-Safe & pH-Neutral Safe on ceramic-coated cars as a maintenance wash — it actually enhances the coating's beading rather than stripping it. Also safe on waxes, sealants, paint, glass, wheels, and plastics.
No Cure Time Unlike traditional sealants that need hours of cure time indoors, HydrO2 Foam locks in during the rinse. Wash, rinse, dry, drive.
Months of Protection Per Wash CarPro rates the silica shell to resist UV, acids, alkaline cleaners, and general contamination for 3+ months with normal use — added to every time you wash.

🛠️ How to Use

1
Prep the Car Work in the shade on a cool surface — never in direct sun or on hot panels. Pre-rinse to remove loose dirt. If the car is heavily soiled, wash first with CarPro Reset before using HydrO2 Foam.
2
Foam & Wash In a foam cannon, dilute roughly 1:9 with water. Foam one panel at a time and wash gently with a wool or plush microfiber mitt. Do not let the foam dry on the surface — this is the single most important rule.
3
Rinse & Dry Rinse the panel thoroughly before moving on. Once the full car is washed, rinse end to end and dry with a plush microfiber drying towel or forced-air blower. No curing, no buffing — the sealant is already working.

Quick Reference

Product Type pH-Neutral Wash + Silica Sealant (2-in-1)
Typical Dilution Around 1:9 with water in a foam cannon
Protection Duration Up to 3+ months per CarPro (conditions-dependent)
Works On Paint, glass, plastic, wheels, coated and uncoated surfaces
Use Conditions Cool panels only, out of direct sunlight, panel-by-panel

HydrO2 Foam must not be allowed to dry on the surface — doing so can cause visible high spots or rainbowing that are difficult to remove. Always work panel by panel in the shade, rinse thoroughly, and refer to the manufacturer's current label for the most up-to-date guidance.

The fastest way to a sealed, beading car.
Order now for quick delivery all over Pakistan.

Pairs well with

FAQs

What Is Your Return Policy?

For All Products Except For Any Oils, We Offer a 7-Day No Questions Asked Return Policy As Long As The Item Is Unused

Can I Get Guidance For A Product?

You Can Contact Us On Our Official WhatsApp at +92 300 8500259 to Talk To Our Team Of Experts .

How Long Does It Take To Deliver?

We Are Committed To Fulfill Orders As Quick As Possible From Our End. Standard Delivery Orders Are Usually Delivered within 5 Working Days While Express Delivery Orders Are Delivered Within 3 Working Days (These Times May Vary Depending On Courier Disruptions)