MJJC Foam Cannon S V3.0

The MJJC Foam Cannon S V3.0 is the next-generation snow foam lance engineered for thick, shaving-cream style foam even with moderate pressure washers. Its upgraded structure, refined straw tube, and new foam tech deliver better coverage, reduced soap usage, and consistent output. Best option for Pakistani car detailers and auto enthusiasts seeking premium foam performance.

• ✅ Thicker foam technology: V3.0 produces dense, shaving-cream style foam with less soap. 
• ✅ Upgraded structure & control: New geometry allows smoother 360° spray adjustment and easier control. 
• ✅ Refined straw & bottle: New suction tube ensures better draw even at angles; improved bottle + cap design for stability and easier mounting. 
• ✅ Interchangeable nozzles: Comes with 1.25 mm orifice preinstalled, plus spare 1.1 mm nozzle for lower-pressure washers. 
• ✅ Broad pressure compatibility: Effective in 1,300–3,600 psi (≈ 90–250 Bar) ranges, making it usable with many common pressure washers. 
• ✅ Easy fitting & no glue needed: Improved MJJC quick-connect system avoids need for PTFE tape or adhesives.

🛠️ How to Use

1. Pre-rinse: Use plain water to remove loose dust, grit, and debris from the vehicle surface.
2. Prepare foam solution: Mix car shampoo or snow foam concentrate with water (per label ratio). Pour into the cannon’s bottle. Use high-quality pH-neutral shampoos for best results.
3. Install and seal: Secure cap, thread or snap-fit the bottle to the cannon body until firmly seated.
4. Pump & pressurize (if required): With manual pump models (if applicable), pressurize gently. Otherwise connect to your pressure washer gun. Ensure system pressure is within 1,300–3,600 psi range. 
5. Select nozzle orifice: Choose 1.1 mm (for lower pressure washers), or 1.25 mm for typical setups. Ensure the orifice matches your washer’s psi rating. 
6. Spray foam evenly: Hold the cannon ~20–30 cm from surface, sweeping in overlapping passes for full coverage.
7. Let dwell: Allow foam to cling for 1–3 minutes. Monitor to avoid drying, especially in hot sun.
8. Agitate & rinse: Optionally use a soft brush or wash mitt to loosen stubborn grime, then rinse thoroughly with clean water.
9. Depressurize & clean: After use, relieve pressure, detach bottle, flush with clean water, and let components dry. Lubricate seals lightly if needed.
10. Store upright & safe: Store in shade, dry environment, and protect the nozzles and seals for prolonged life.

Designed for Pakistani detailers and car wash businesses, the MJJC Foam Cannon S V3.0 delivers reliable, dense foam performance with low soap consumption.