5 Common Mistakes Pakistanis Make When Choosing Engine Oil

In this blog, we'll cover:

• The 5 most common engine oil mistakes in Pakistan
• Why avoiding these errors is critical
• How Automize provides premium solutions for your vehicle

Why the Right Grade Matters

Engine oil grades, indicated by numbers like 10W-30 or 5W-40, represent the oil's viscosity under varying temperatures. In Pakistan, where temperatures can range from extreme cold in northern regions to scorching heat in the south, choosing the right grade is crucial. Using an incorrect grade can disrupt your engine's performance and longevity.

⚠️ Consequences of Using the Wrong Grade:

• Reduced Efficiency: Oil that's too thick during cold starts may fail to flow properly
• Overheating Risks: Thin oil in high temperatures breaks down faster
• Increased Wear: Accelerated component damage from improper lubrication

✅ How to Choose the Right Grade:

• Consult Your Manual: Follow manufacturer recommendations
• Adapt to Climate: Thicker oils for hot regions, thinner for cold areas
• Trust Premium Brands: Kixx, Caltex, LiquiMoly available at Automize

The Importance of Timely Oil Changes

Engine oil degrades over time, losing its ability to lubricate and cool effectively. In Pakistan’s often dusty and congested driving conditions, this degradation happens faster than many drivers expect. Regular oil changes are crucial for maintaining the engine's health, especially in urban areas like Karachi, Lahore, or Islamabad, where stop-and-go traffic accelerates wear and tear.

⚠️ What Happens When You Delay Oil Changes:

• Oil Oxidation: Overused oil thickens due to oxidation, reducing flow and causing internal engine stress.
• Debris Accumulation: Dirt and metal particles from engine wear collect in old oil, turning it abrasive and damaging components.
• Increased Fuel Consumption: Sludgy oil forces the engine to work harder, lowering fuel efficiency.

✅ Recommended Oil Change Intervals:

• Follow Manufacturer Guidelines: Most vehicles require oil changes every 5,000 to 7,000 km, depending on whether you use synthetic or mineral oil.
• Adapt to Driving Conditions: If you often drive short distances, navigate heavy traffic, or travel on rough roads, consider changing oil more frequently.
• Use Trusted Products: Choose quality engine oils from brands like Caltex, Kixx, and Liqui Moly—available at Automize.

The Risks of Low-Quality Oils

In Pakistan, counterfeit and low-quality engine oils have become a significant concern. These oils are often attractively priced, luring car owners into compromising on quality without realizing the potential damage to their vehicles. Unlike genuine oils that undergo rigorous testing and meet industry standards, counterfeit products often lack the necessary additives and quality controls.

⚠️ Here’s Why Avoiding Such Oils Is Crucial:

• Clogged Oil Filters: Counterfeit oils degrade rapidly and form sludge that blocks oil filters, disrupting flow and causing overheating.
• Accelerated Wear and Tear: Poor lubrication increases friction between engine parts, wearing out pistons, camshafts, and other critical components faster.
• Increased Engine Sludge: Low-quality oils break down and leave behind harmful residues that reduce overall engine efficiency.

✅ How to Avoid Counterfeit Engine Oils in Pakistan:

• Check the Packaging: Always inspect containers for tamper-proof seals, holograms, and correct labeling with manufacturer certifications.
• Buy from Trusted Dealers: Only purchase from reputable sources like Automize, which guarantees 100% genuine, high-performance engine oils.

Why Monitoring Oil Levels is Vital

Low engine oil levels are one of the leading causes of engine damage. Despite its importance, many car owners in Pakistan neglect this simple yet crucial maintenance task.

⚠️ Risks of Low Oil Levels:

• Inadequate Lubrication: Insufficient oil increases friction between engine parts, causing overheating and wear.
• Engine Overheating: Low oil levels reduce cooling capacity, risking serious damage.
• Oil Pump Failure: Running with too little oil strains the oil pump, potentially leading to costly breakdowns.

✅ How to Check and Maintain Oil Levels:

• Use the Dipstick: Regularly inspect oil using the dipstick—ensure it's between the "min" and "max" markers.
• Top Up When Needed: Keep a reliable oil brand like ABRO or Flamingo available for timely top-ups.
• Monitor for Leaks: Frequent top-ups may indicate leaks—consult a trusted mechanic if needed.

Why Recommendations Matter

Car manufacturers design engines with specific oil requirements to optimize performance and protect against wear. Ignoring these recommendations can lead to severe engine damage.

⚠️ Common Mistakes:

• Mismatched Specifications: Using oils that don’t meet required API or ACEA standards can compromise engine health.
• Overlooking Additives: Some engines need specific additives like detergents or anti-foaming agents, which may be absent in generic oils.
• Incompatibility with Modern Engines: Turbocharged, hybrid, and modern engines often require synthetic or semi-synthetic oils for optimal performance.

✅ How to Stay on Track:

• Check the Manual: Refer to your owner's manual for detailed oil specifications tailored to your vehicle.
• Consult Professionals: If you're unsure, get expert advice from experienced mechanics.

🛠️ Our Engine Care Product Range Includes:

• Engine Oils: Available in various grades and formulations from reliable brands such as Aisin, Liqui Moly, Caltex, and Kixx.
• Transmission Fluids: For smoother gear shifting and longer transmission life.
• Fuel Additives: Boosting fuel economy and cleaning the fuel system.
• Power Steering Fluids: Ensuring effortless steering and enhanced driving comfort.
• Brake Oil & Grease Oil: Keeping critical braking and mechanical systems working efficiently

✅ Final Word: By avoiding common engine oil mistakes and choosing trusted products from Automize, you ensure a smoother, safer, and more efficient driving experience. Let us take the guesswork out of car maintenance—shop with confidence today.