Carpro Fixer - Verstile Medium Cut Compound (1l)
Carpro Fixer - Verstile Medium Cut Compound (1l)
Carpro Fixer - Verstile Medium Cut Compound (1l)

Carpro Fixer - Verstile Medium Cut Compound (1l)

Rs.11,350.00
CarPro Fixer One-Step Compound & Polish | Automize

Compound and Finish in One Step.

CarPro Fixer is a one-step nano polish and compound that cuts through swirls, scratches, and sanding marks — then finishes the paint down to a high-gloss mirror finish, all in the same pass.

Most correction work means two or three products: a cutting compound, a medium polish, and a finishing polish. Fixer collapses that into one. Its diminishing nano abrasives start aggressive enough to remove 1500 grit sanding marks, then break down progressively to a mirror finish as you work the section. Change the pad, and you change the behaviour — heavier cut on wool or microfiber, finer finish on foam. One bottle adapts to the job.

One Product, Full Correction Handles everything from 1500 grit sanding marks, scratches, marring, and haze down to a final high-gloss finish — on soft, medium, hard, and ceramic scratch-resistant paints.
Body Shop Safe No silicones, no wax, no polymers, no Teflon. Fixer corrects paint without hiding defects behind fillers — what you see after wiping is the real result. Ideal as the last polish step before a ceramic coating.
Any Pad, Any Machine Compatible with wool, microfiber, and foam pads on both dual-action and rotary polishers. The cut level follows the pad — aggressive on cutting pads, refined on finishing pads.
Low Consumption, Low Dust 3–5 drops per section is all it takes. Long work time, minimal dusting, and easy wipe-off — less product wasted, less cleanup after each panel.

🛠️ How to Use

1
Prime the Pad Apply 3–5 drops of Fixer to your pad. Spread at low speed across the section to lubricate the pad and paint before increasing pressure or speed.
2
Polish Increase to working speed (around 4–5 on a DA, 600–1200 RPM on a rotary) with zero to medium pressure. As the abrasives break down, gradually lower speed and continue until the product has fully worked through.
3
Wipe & Inspect Clean the pad with a brush after each section. Wipe the panel with a clean microfiber and inspect under proper lighting — use CarPro Eraser or IPA to check the true finish without polish oils masking the result.

Quick Reference

Product Type One-step compound & polish (diminishing nano abrasives)
Cut Level Medium — adjustable via pad choice
Paint Compatibility Soft, medium, hard, ceramic scratch-resistant, freshly painted
Machine Compatibility Dual-action and rotary polishers
Speed Range 4–5 on DA / 600–1200 RPM on rotary
Fillers None — body shop safe

Machine polishing removes clear coat. Always test on an inconspicuous area first, use a paint depth gauge if available, and work with the least aggressive pad that achieves the desired correction. Speed and pressure recommendations are starting points — adjust based on paint hardness, temperature, and pad condition. Refer to the manufacturer's current label for the most up-to-date guidance.

One compound. One polish. One step.
Order now for quick delivery all over Pakistan.

Pairs well with

FAQs

What Is Your Return Policy?

For All Products Except For Any Oils, We Offer a 7-Day No Questions Asked Return Policy As Long As The Item Is Unused

Can I Get Guidance For A Product?

You Can Contact Us On Our Official WhatsApp at +92 300 8500259 to Talk To Our Team Of Experts .

How Long Does It Take To Deliver?

We Are Committed To Fulfill Orders As Quick As Possible From Our End. Standard Delivery Orders Are Usually Delivered within 5 Working Days While Express Delivery Orders Are Delivered Within 3 Working Days (These Times May Vary Depending On Courier Disruptions)