Dissolve the Minerals. Restore the Surface.

Mafra Maniac Line Water Spot Mineral Remover is a ready-to-use, non-abrasive chemical decontaminant that dissolves limescale, salt residues, cement efflorescence, acid rain etching, and mineral water spots from paint, glass, chrome, and plastics — without scratching or damaging the surface underneath.

Mineral contamination doesn't respond to washing. Limescale, hard water deposits, and salt residues bond chemically to glass and paint — which means the only effective fix is a chemical that dissolves the bond rather than scrubbing at it. Maniac Line Water Spot Mineral Remover does exactly that. Non-abrasive chemical dissolution that lifts mineral deposits cleanly off every surface without risking the clear coat, glass coating, or chrome finish underneath. It also prepares the surface for nano sealants and glass coatings by removing all mineral contamination that would otherwise sit between the surface and the product.

Quick Reference

Important safety warning: this product is corrosive and causes severe skin burns and eye damage on contact. Always wear chemical-resistant gloves and eye protection before use. Never apply in direct sunlight or on hot surfaces. Do not exceed 60 seconds dwell time and never allow the product to dry on the surface — rinse immediately and thoroughly after each section. Keep away from children. Refer to the full safety data sheet on the product label before use.